Buffalo Technology WHR-G54S Manuel d'utilisateur télécharger pdf (Page 77)

Most problems with setting up WDS are caused by incorrectly entering the MAC

addresses into each AirStation’s Web-Based Conguration Utility. If you’re having

problems, check the MAC address settings in both AirStations’s Web-Based Conguration

Utilities. Each Airstation should be congured to be in a bridge with the other’s wireless

MAC address.

Conrm that all bridges are set to the same wireless channel.

Check the Packet Log (Advanced/Diagnostic/Packet Info) in each AirStation’s Web-

Based Conguration Utility to conrm communication between them (screenshot to

right). The “WDS” entries should show packets both

sent and received. In this example, the packet log

shows packets sent but not received, so the next

troubleshooting step would be to check the other

AirStation’s settings and packet log for more clues.

If you cannot access the AirStations wirelessly,

reconnect the Ethernet cables as shown on page

67 to easily access the AirStations’s Web-Based

Conguration Utilities.

Troubleshooting WDS

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 92 93

Pas de commentaire

Buffalo Technology WHR-G54S Manuel d'utilisateur Page 77